SONIC-POTIONS Erica Synths LXR-02, Руководство пользователя

Страница: 25 / 44

LXR OWNERS MANUAL 25
7.8. SONG MODE
The song mode allows you to arrange up to 64 patterns to play after each other
to arrange them into a song.
EDITING SONGS
To enter song mode, press SHIFT + SONG (Seq. 10)
The song mode page will show the following menu on screen
> The first column shows the slot number. These are just the numbers from 0
to 63.
> The square brackets highlight the current cursor selection for the encoder.
> If in the first column, the encoder will scroll the whole list up or down.
> In the second column, the encoder will select the pattern to play.
> Push the encoder to change between the 2 columns.
> An arrow on the right side just indicates that the list continues in this
direction offscreen.
USING THE SEQUENCER BUTTONS TO ADD PATTERNS
A convenient way to add patterns to the song table is to use the SEQUENCER
buttons.
Instead of using the encoder, you can just push the corresponding SEQUENCER
button to select a pattern for the active row. Quite similar to the pattern
change menu in pattern mode.
The BAR buttons are used as usual to view the 4 different pattern groups.
INSERTING AN REMOVING LINES
To insert a line into the song table, just push the COPY button. It will insert a copy of
the highlighted pattern in the slot below and shift the following patterns down by one.
To delete a line from the song table, use the clear function by pressing
SHIFT + COPY = CLEAR
This will delete the currently selected row.
SPECIAL PATTERNS
Besides the normal pattern numbers from p00 to p63, you can set the second
column to ‘END’ and LOOP.
END
The end marker tells the sequencer that the song ends here. When reaching a slot
with the end marker, the sequencer will stop playback.
LOOP
The loop marker tells the sequencer to start the song again from the beginning. So
if you have the following list in the song menu:
> p00
> p01
> LOOP
the sequencer will play p00, p01, p00, p01… indefinitely.
PLAYING A SONG
To play the loaded song, hit SHIFT + PLAY.
The LXR will now play the pattern chain defined on the song mode page, even if
you change menus or change to view the performance or voice modes.
Please be aware, that temporary changes you make to the pattern
are lost whenever the song mode changes the pattern. So editing
in song mode is not advisable, since automatic pattern changes will
occur frequently in this mode!
[000]
>
|
|
001
p00
p01
