LOCATING YOUR Sonic T24 SYSTEM
Position Sonic T24 system on a stable, level surface. The Sonic T24 system
can be placed close to video displays such as TVs and computer monitors
without distorting the image, but keep magnetic storage media (such as
drives, disks, and tapes) at least four inches away to avoid data loss.
CONNECTING TO YOUR Sonic T24
Warning:
Ensure that the Sonic T24 system is in the POWER OFF mode
before making any connections and before docking the iPod into the Sonic
T24 system. To ensure proper operation, please carefully follow the
connection sequence as described below and in the order indicated.
Insert the appropriate iPod universal adapter sleeve, provided with your
Sonic T24 or your new iPod. An iPod model with a 30 PIN connector can be
connected directly to the 30 pin docking station located on the Sonic T24
system.
An older iPod model without a 30 PIN connector can be connected
via the AUX IN port located on the back of your Sonic T24 case and by using
the 3.5 mm stereo cable, included. When you’re sure that the either
method of connection has been made you are ready to play the Sonic T24
speakers.
POWER
To use external power by power adapter
:
When the iPod is connected to the Sonic T24 system, insert the AC adapter
barrel connector into the jack marked DC 14V IN
,
and then insert
the universal power adaptor blade end into your AC power wall jack. Your
Sonic T24 is ready to play. When docked, your iPod will also recharge when
using the AC adapter.
START PLAYING
1. With your iPod seated in the docking station, or connected via the 3.5
mm stereo cable, press the PLAY/PAUSE button on the remote control
while pointing it towards the T24 in order to turn the iPod and the
Sonic T24 on.
2. Adjust the volume using the volume adjustment on the remote control
or the volume adjustment on the Sonic T24, and play your favorite
tunes. (Note that the iPod’s volume control is bypassed when docked
in the Sonic T24.)
3. Skip: Pressing the left/right skip button on the remote control will
advance the song selection forward or backward on the iPod.
4. Mute: When mute is pressed on the remote, the music will continue to
advance play but the volume will be turned off. To restore, press the
mute button again.
5. Play/Pause: Press on the remote to play or pause the song selection.
6. Repeat: This button on the remote will cause the current song to
repeat. The repeat function does not work for an audio unit plugged
into the AUX connection.
7. Power: To turn both the iPod and the T24 on/off, press the power
button on the remote control. The unit will be switched to sleep
mode when the power is off.
VOLUME CONTROL
The
buttons on the front panel are the master volume controls for
the Sonic T24 system. Press and hold
“
+
”
to increase the volume and then
“
-
”
to decrease the volume. The volume will start at 30% maximum volume
