LOCATING AND SETTING UP YOUR i-FUSION SYSTEM
Position i-Fusion system on a stable, level surface. The i-Fusion system can
be placed close to video displays such as TVs and computer monitors
without distorting the image, but keep magnetic storage media (such as
drives, disks, and tapes) at least four inches away to avoid data loss.
Make sure that the plastic clips securing the hinge straps are secure. If
necessary, adjust the tension of the release button on the clips by pressing
in through the hole on the back of the clip, using the tip of a ball point
pen. Note that you can open the i-Fusion completely flat by releasing both
clips.
CONNECTING TO YOUR i-FUSION
Warning:
Ensure that i- Fusion system is in the POWER OFF mode before
making any connections and before docking the iPod into the i-Fusion
system. To ensure proper operation, please carefully follow the
connection sequence as described below and in the order indicated.
Attach the iPod adapter sleeve, provided with your i-Fusion, that matches
the model of your iPod. Each sleeve will be marked with the iPod models.
An iPod model with a 30 PIN connector can be connected directly to the
30 pin docking station located on the i-Fusion system. An older iPod
model without a 30 PIN connector can be connected via the INPUT port
located at the side of your i-Fusion case and by using the 3.5 mm stereo
cable, included. When you’re sure that the either method of connection
has been made you are ready to play the i-Fusion speakers.
POWER
The i-Fusion can operate using the rechargeable built-in Lithium ion
battery. You may bypass the battery and use the external AC 9V@5A
power adapter included with your i-Fusion. The AC adapter will power
your unit, recharge the Lithium ion battery and recharge your iPod in the
30 pin connector station all simultaneously.
To use external power by power adapter
:
When the iPod is connected to the i-Fusion system, insert the AC adapter
barrel connector into the jack marked DC IN 9V
, and then insert
the universal power adaptor blade end into your AC power wall jack. Your
i-Fusion is ready to play. When docked, your iPod will also recharge when
using the AC adapter.
To use the rechargeable, built-in, Lithium ion battery supply:
The i-Fusion system has a powerful, rechargeable Lithium ion battery built
into the case. Utilizing this independent power source, you can play your
iPod for hours between charges. Please note that recharging of the iPod
does not occur when powering off the Lithium ion battery.
START PLAYING
1. With your iPod seated in the docking station, or connected via the 3.5
mm stereo cable, slide the power switch
on the front panel
to
“
AUTO ON
”
position to turn the i-Fusion on. The LED display will
turn green.
2. Turn on your iPod, adjust the volume using the volume adjustment on
the i-Fusion, and play your favorite tunes. (Note that the iPod’s
volume control is bypassed when docked in the i-Fusion.)
