Sonel KT-160, Инструкция по эксплуатации

Страница: 98 / 126

KT-160 USER MANUAL 96
5 Infra-red filming
Infra-red video can be recorded with KT-160 or KT-160A camera when it is connected to a
computer via USB 2.0 connection, registration takes place in the computer memory (hard
disk); this makes the record length limited to the capacity of the computer's hard drive (1
minute of IR video recording is about 25MB). IR video stored in a computer may be
analysed both during recording and later when read from the disk. Operation of the
camera in the video mode, recording and analysis is done using software supplied with
the camera, ("Sonel ThermoAnalyze ®")
Infra-red filming is possible after installation of the driver supplied on the software CD with
the camera.
5.1 Installing the camera driver
5.1.1 Hardware requirements
Operating System: Microsoft® Windows 2000 or higher (IE5.0 or higher)
Processor: Pentium 4 2.4GHz or more
RAM: at least 512M
5.1.2 Installation
It is recommended to install the driver before connecting the camera to the computer.
The installation program should run automatically when the CD with the software
(supplied with the camera) is placed in the CD-ROM drive. If it does not, run the
“autorun.exe” in the root directory of the CD.
After selecting the language, select "Thermal Cameras" in the window that appears:
and then "Install Driver"