Sonel KT-160, Инструкция по эксплуатации

Страница: 113 / 126

KT-160 USER MANUAL 111
6 Data transmission and analysis
To perform the transmission of thermal images recorded with the camera, PC must have
the driver (when the internal memory is used) and Sonel ThermoAnalyze software
installed on its hard disk (see section 5.1, 5.2).
6.1 Reading the external memory (SD card)
When the SD card the is inserted in the slot (14) and selected in the menu (see 3.10.3),
then, after connecting the camera to PC the content of the SD memory card is seen as
another drive installed on the computer. Depending on the mode (section 3.10.3), the files
containing thermograms are in the “PICTURE” directory, or directories “PICTURE1”,
“PICTURE2”, “PICTURE3”:
Remarks:
- To perform data transmission in the manner described above, Sonel ThermoAnalyze
software must not be running.
- When connecting the camera to the computer when the SD memory card is selected, it
is impossible to operate the camera.
- The SD memory card may also be read using an external card reader installed on the
computer (the card reader is supplied with the camera).
6.2 Using the internal Uflash memory
Reading data from the internal memory (Uflash) is possible only using ThermoAnalyze
Sonel.
NOTE: Reading data from the internal memory is possible only if the SD memory card is
not inserted in the camera's slot (14) and Uflash memory is selected as the default
memory (see 3.10.3).
In order to read (copy) recorded thermal images, run the program and connect the