The programming is done via SMS messages through a mobile phone. It is imperative to introduce exactly the same characters as they are written in the description. Phones
with call in hidden number identification can only send orders and can not receive confirmation messages.
When
TELKAN
receives the order, it returns an SMS to the sender with confirmation of the new configuration, if you want to override this SMS (saving money card that
manages the
TELKAN
) must only add an asterisk (*) at the end of each order (not for relay status query and History temperatures).
To turns relay ON (*)
acces code rNo relay on
È
È
0000 on
Turns the relay on and returns a status message to the sender
acces code rNo relay on No minutes
È
È È
0000 on 15
Turns the relay on for the number of minutes specified in the message and then switches it OFF. (Adjustable: 1
...64 800 minutes.) This command returns two status messages to the sender: the first to confirming receipt of
the command, and a second message when the relay status changes to OFF.
To turns relay OFF (*)
acces code rNo relé off
È
È
0000 off
Turns the relay off and returns a message to the sender indicating the new status.
Exemple of SMS
= 1 space
È
Timed relay activation (*)
Log telephone number for receiving SMS (*)
To receive SMS alarm must register the phone number with the function inform on
acces code inform on
È
È
0000 inform on
Save the phone number that sent this order to send SMS alarm to occur. Save up to 4 phone numbers, then
you have to clear before sending a new one.
Timed relay deactivation (*)
Reset all phone numbers in memory for receiving SMS (*)
acces code inform reset
È
È
0000 inform reset
Deletes ALL the phone numbers stored in memory for alarm notification via SMS.
Operative status (*)
acces code alive No days
È
È
0000 alive 1
Sends a test message every number of hours configurated to communicate that status of device is operative (SIM
has money and works correctly). If programmed to 0, the function is off. Range: 0 (off) ... 45 days.
USE SMS MESSAGES TO CHANGES SETTINGS
acces code =
0000
(from factory, change by personal code)
acces code rNo relay off No minutes
È
È È
0000 off 15
Turns the relay OFF for the number of minutes specified in the message and then switches it ON. (Adjustable: 1
...64800 minutes.) This command returns two status messages to the sender: the first to confirming receipt of
the command,and a second message when the relay status changes to ON.
Change of acces code
acces code pass new code
È
È
0000 pass 1234
Changes the access code (from the factory default of 0000) and returns a confirmation message to the sender
Relays behaviors, MEET (*)
You can link any of the relays to any of the inputs (temperature sensor, contact closure alarm, battery)
acces code meet
È
0000 meet
It returns a message with the status of the function on/off and device is connected as the operation of the relay
acces code meet
rNo relay
a1
È
È
È
0000 meet r1 a1
When it detects an contacts alarm relay activates permanently until there is a forced manual or by SMS.
acces code meet
rNo relay
b1
È
È
È
0000 meet r1 b1
When it detects a change in power supply (battery to grid / network battery) activates the relay permanently
until there is a forced manual or by SMS.
Remove phone numbers for receiving SMS (*)
acces code inform off
È
È
0000 inform off
Delete the phone number you sent the order for receiving sms alarm.
List of number of phones that receive SMS
acces code inform
È
Returns an SMS to the sender reporting phone numbers that will send the SMS at alarm temperature, contacts,
failure of power supply in net
0000 inform
acces code meet
rNo relay
t1
È
È
È
0000 meet r1 t1
When it detects an temperature alarm (rising or falling humidity) activates the relay permanently until there is a
forced manual or by SMS.
Battery:
b1
Relay:
r1
Temperature probe:
t1
Contact Alarm:
a1
IMPORTANT:
to receive SMS alarm, alive and other than shipping immediately has to register the phone number on control with the function inform.
acces code alive
È
0000 alive
Sends a SMS with the time remaining for the next send of sms alive
SMS estructure
acces code meet
rNo relay
off
È
È
È
0000 meet r1 off
The relay operation is independent. The relay is activated by SMS or manually pressing the front button
TELKAN
(*)
It means that this order has the option to override the confirmation message by adding an asterisk at the end of the message
Programm the sending of test message without SMS of confirmation
Example of order without return SMS of confirmation (adding * at the end of the SMS order)
0000 alive 1*
acces code alive No days*
È
È
Status Query
If you missed a call the number on the SIM, SMS returns a test
acces code test
È
0000 test
Send an SMS to the sender reporting the status of the relay, the time it is connected (if
programmed), status of the GSM signal
TELKAN
and current temperature.
Version
acces code version
È
0000 version
Send an SMS to the sender informing the program version, modem type, modem signal, voltage for
the power supply (values of battery charge or electric network) & status of PROMO function.
Alarm Settings Query
acces code alarm
È
Returns a text message informing the sender of the setting, on / off and values of the alarms for
temperature, contacts failure of power supply in net..
Checking recent temperatures & readings
acces code avg t1
È
È
0000 avg t1
Returns an SMS with the current temperature and the average temperature for the past 1 min, 4
mins, 15 mins, 1 hr and 4 hrs.
0000 alarm
Alarm deactivation (*)
acces code alarm a1 off
È
È È
0000 alarm a1 off
Deactivates the alarm function and returns an SMS to confirm the new status.
Alarm activation (*)
acces code alarm a1 on
È
È È
0000 alarm a1 on
Activates the contact alarm function and returns an SMS to confirm the new status.
If you also
want to alert you when the alarm occurs it is necessary to send the order to inform on.
Alarm activation/deactivation delay (*)
acces code delay a1 minutes minutes
È
È È
È
0000 delay a1 2 5
Delays on / off contacts alarm (default 0, disabled = reported immediately). You can set a common
value for activation and deactivation (0000 delay 5) or different in each case, two values of
minutes: 0000 delay 5 10). Range (0 ... 240 minutes).
acces code delay b1 minutes minutes
È
È È
È
0000 delay b1 2 5
Delays on / off failure of power supply alarm (default 0, disabled = reported immediately). The same
operation as the previous order.
acces code delay t1 minutes minutes
È
È È
È
0000 delay t1 2 5
Delays on / off temperature alarm (default 0, disabled = reported immediately). The same operation
as the previous order.
acces code delay
È
0000 delay
Returns an SMS to the sender informing of delays programmed to alarm temperature. for each of
type alarm, temperature, contacts, failure of power supply...
Alarm contact
Alarm failure of power supply
Alarm temperature
acces code alarm b1 off
È
È È
0000 alarm b1 off
Deactivates the alarm function for failure of power supply and returns an SMS to confirm the new
status.
acces code alarm t1 off
È
È È
0000 alarm t1 off
Deactivates the alarm function for temperature and returns an SMS to confirm the new status.
acces code alarm b1 on
È
È È
0000 alarm b1 on
Activates the alarm function for failure of power supply and returns an SMS to confirm the new
status.
If you also want to alert you when the alarm occurs it is necessary to send the order to inform
on.
acces code alarm t1 temperaturE °C
È
È È
0000 alarm t1 45
Activates the Temperature alarm function, sets the temperature limit to that sent by the user and
returns an SMS to confirm the new status.
If you also want to alert you when the alarm occurs it is
necessary to send the order to inform on.
To change SMS language
acces code lang No new language
È
È
0000 lang 0
Changes the language setting (default Spanish) to the selected language No: 0=Spanish, 1=English
Exemple of SMS
Receiving messages Commercials (*)
from factory setting in off
acces code promo off
È
È
0000 promo off
Sets the control to delete all commercials messages received
acces code promo on
È
È
0000 promo on
The control sends at the telephone number registered in function inform, all received messages
that start with text.
Calibration temperature probe t1
acces code cal t1 value to subtract or add
È È È
0000 cal t1 -0.3
Allows you to adjust the probe reading. Using a precision pattern thermometer, look at the current
temperature reading and then adjust the probe reading to the reading of the standard
thermometer. Scale: -10.0 to 10.0, factory set to 0.0.
