background image

SAFETY

It is recommended the operator complies with the Health and Safety Regulations applicable to the vessel and the 

region before operating this equipment.

If the equipment is used in a manner not specified by the manufacturer, the protection provided by the 

equipment may be impaired.

Documentation must be consulted whenever the warning symbol       is found on the equipment, in order to find 

out the nature of the potential hazard and any actions which must be taken.

The ROVNav 6 weighs 13 kg, Manual Handling Equipment (MHE) must be used to 

move the transceivers. If MHE is not available, then a manual handling assessment 

must be carried out prior to carrying out manual lifting / handling. Make sure 

Personal Protective Equipment such as protective footwear and gloves are worn 

before lifting this equipment.
Electric shock hazard risk if the Remote Transducer output connector contacts are 

touched whilst the transducer cable is disconnected, the unit is powered and if 

instructed to transmit. Never touch the connector contacts whilst the power is on.
High pressure risk when dismantling the equipment. Dismantling the sub-sea 

equipment must only be carried out by trained personnel.
Do not stand in direct line with the end of the ROVNav 6 when operating the Pressure 

Relief Valve. Sudden release of high pressure gases from the ROVNav 6 could cause 

injury to personnel. Wear Personal Protective Equipment such as goggles when 

operating the Pressure Relief Vent Valve.
Make sure the Pressure Relief Vent Valve is manually operated, in a well ventilated 

area, to release any internal pressure before attempting to remove the end-cap. 

Electric shock hazard risk is present when dismantling the equipment. High 

voltages are present inside the ROVNav 6. Dismantling the equipment must only be 

carried out by trained personnel.

     

WARNINGS

PRODUCT SUPPORT

Email: [email protected]
Tel: +44 (0) 1252 872288

Should you require NON-EMERGENCY product support for your ROVNav 6, email and telephone product 

support is available during normal UK office hours (08:00-17:00). Alternatively, please contact your nearest 

Sonardyne Office. Visit www.sonardyne.com for full details.

In emergency situations, the Sonardyne 24 hour helpline is answered during normal office hours - 08:00-17:00. 

Outside these hours, your call is automatically transferred to an agency who will log the details of your 

emergency and alert the appropriate Sonardyne personnel. Our aim is to ensure that emergency requests are 

dealt with immediately during office hours and are responded to within 30 minutes at all other times.

SONARDYNE 24HR EMERGENCY HELPLINE: UK +44 (0) 1252 877600

 

STEP 1

Содержание 6G ROVNAV 6

















Отзывы: