FITTING CHECK –
force the end profile into rail ‘A3’ brackets and
push hard
to click
into place. Work from the middle outwards, it will make a loud positive ‘clicking
noise’ as it secures into place.
3.5
3.6
3.7
The Blind will now be under the correct tension. Get a qualified electrician to
connect the power to the Blind. Once the power is active the Blind will jog once
(back and forth motion) and is now ready to be operated from the handset.
Calibrate the Blind by pressing the down arrow on the handset to fully close, then
the up arrow to full open. The ‘my’ button stops the Blind. This may need to be
done several times to calibrate.
The Blind is now ready for normal operation.
FI
TTING
GUIDE
SONASHADES.COM
9
SonaS
ky Mot
orised Blind
