STEP
2
2.1
2.3
2.2
2.5
2.4
Now locate the remaining side rails marked ‘B1’ and ‘B2’.
Rest rails ‘B1’ and ‘B2’ on the already fitted rails ‘A1’ and ‘A3’ (see image below).
Secure the rail ‘B1’ first. Depending on the length of rail ‘B1’ it should fit nicely in-
between rails ‘A1’ and ‘A3’.
Secure rail ‘B1’ by firstly marking the drill positions with a pen through the pre-drilled
holes already visible on the rail. Take away the trim and drill your required holes
through the plasterboard ensuring you
DO NOT
drill into the timber behind it.
Using the screws provided, start at the middle of rail ‘B1’ and screw the trim on
securely so all ends are securely fixed.
DO NOT
over tighten the screws as this may
damage the plasterboard.
B1 or B2
A1 or A3
FI
TTING
GUIDE
SONASHADES.COM
5
SonaS
ky Mot
orised Blind
