STEP
4
WARNING –
The battery pack must be mounted under the blind. This avoids
any excessive heat from direct sunlight interfering with the battery’s safety and
performance.
Please see manufacturer’s instruction provided for further guidance
(see image below).
Fitting the optional Solar & Battery Pack.
4.1
4.2
4.3
4.4
4.5
Before installing the battery pack, use the black rubber gromets provided and place
into to the pre-drilled hole in the centre of the L-profile rail (see image below).
Thread the motor wire through the hole from the top of the blind.
Now connect the battery pack to the
Blind. Once connected the Blind will
jog once (back and forth motion)
and is now ready to be operated
from the handset.
Calibrate the Blind by pressing the
down arrow on the handset to fully
close, then the up arrow to full open.
The ‘my’ button stops the Blind. This
may need to be done several times
to calibrate.
The Blind is now ready for normal
operation.
OPTIONAL SOLAR PANEL –
If using a
solar panel, pass the cable through the
top of the black grommet as the battery
will need to connect to the solar panel
directly. Join the solar panel connector
to the battery pack. The solar panel can
be fitted to the glass with sticky pads or
left to rest on the Blind stack if secure
enough (as per the below image).
Battery Pack
Black rubber grommet
to be placed in hole here
FI
TTING
GUIDE
SONASHADES.COM
10
SonaS
ky Mot
orised Blind
