4
19. Do not touch the unit or the power cable with wet hands.
20. The appliance may only be connected to 230 V~ / 50 Hz electric wall outlets.
21. Unwind the power cable completely.
22. Do not lead the power cable over the appliance.
23. Do not lead the power cable under carpets, doormats etc.
24. The appliance should be located so as to allow easy access and remove of the power
plug.
25. Lead the power cable so as to prevent it from being pulled out accidentally or tripped over.
26. Due to continuous improvements the design and specifications may change without any
prior notice.
27. The actual instruction manual can be downloaded from www.somogyi.hu.
28. We don’t take the responsibility for printing errors and apologize if there’s any.
29. The unit is intended for household use. No industrial use is permitted.
Caution: Risk of electric shock! Do not attempt to disassemble of modify the unit or its
accessories. In case any part is damaged, immediately power off the unit and seek the
assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced
by the manufacturer, its service facility or similarly qualified personnel.
ASSEMBLY OF THE DEVICE
1. Insert the lower part of the stand (16) into the plastic base mounting module (17). Make
sure it fits properly and is secured in place.
2. Attach the 4 pcs plastic bases (18) to the base fixing module (17), until it clicks.
3. Loosen the height fixing screw (15), pull out the upper part of the stand (14) until the
desired height, then fix with the screw.
4. Place the motor on the stand, secure it with the screw (11).
5. Insert the rear part of the grid (7) on the motor, so that the 2 pcs fix grid fixing holders are
at the bottom.
6. Then screw in the grid fixing plastic nut (6).
7. Place the blade (5) on the motor shaft and secure it with the blade fixing screw (4).
8. Insert the lower edge of the grid’s front part (3) to the 2 pcs fix grid fixing holder, then fix to
the rear part with the foldable grid fixing holders.
9. Finally, secure the front and rear part of the grid at the top with the small screw and nut (2).
CLEANING
In order to ensure optimum functioning, the unit may require cleaning at least once a month,
depending on the manner of use and degree of contamination.
1. Prior to cleaning switch off and power off the unit by unplugging it from the electric outlet.
2. Attention! When the fan is powered off, remote the front part of the grid.
3. Use a slightly moistened cloth to clean the unit’s exterior. Do not use any aggressive
cleaners. Avoid getting water inside of and on the electric components of the appliance.
