4
ASSEMBLY AND INSTALLATION OF THE UNIT
1. Follow the steps of figure 2.
2. Place the appliance on a solid, horizontal, flat surface! Connect the included cable to the device.
3. Remove the plastic bulb (2.) from the water tank.
4. Pour distilled water into the water tank up to the MAX mark. Do not overfill the water tank, as it does not
produce a sufficient amount of cold vapor. Do not allow water to flow into the fan nozzle (5.)!
5. Pour distilled water into the water tank up to the circular horizontal line. Do not overfill the water tank, as it
does not produce a sufficient amount of cold vapor. Do not allow water to flow into the fan nozzle (6.)!
6. Replace the plastic cover (2).
7. Connect the USB connector to a to a standard 5 V DC / minimum 800 mA capacity USB socket.
8. The unit is ready for use.
CLEANING
If hard water is used, over time limescale will be deposited in the water tank and in the parts in contact with the
water. The limescale deposited on the oscillator inhibits normal operation.
We recommend that
1. Use distilled water.
2. Clean the water tank and oscillator weekly.
3. Frequently change the water.
4. If it is not used for a long time, clean the entire appliance and store it dry.
Cleaning the water tank and the oscillator, descaling
1. Turn off the humidifier, then disconnect it from the power supply by unplugging the connection plug.
2. Pour out the distilled water from the water tank.
3. Dissolve 1 coffee spoon citric acid in 1 dl warm water (max 60 °C).
4. Pour this solution into the water tank of the appliance and allow to stand for 5 minutes.
5. Pour the solution out of the appliance and rinse with clean, cold water.
TROUBLESHOOTING
Malfunction
Possible solution
humidifying does not work
fill distilled water to the water tank
check the mains adapter
humidifying is not effective enough
reduce the water level clean the oscillator
DISPOSAL
Waste equipment must be collected and disposed separately from household waste because it may
contain components hazardous to the environment or health. Used or waste equipment may be
dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical
nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By
doing so, you will protect the environment as well as the health of others and yourself. If you have any
questions, contact the local waste management organization. We shall undertake the tasks pertinent to
the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.