Somogyi Elektronic 5999084955717, Инструкция по эксплуатации

Страница: 4 / 24

4
26. Lead the power cable so as to prevent it from being pulled out accidentally, and do not let it hang
over the edge of a table!
27. Heating elements / heated surfaces of the appliance are still warm for a while after the unit has
been switched off!
28. Switch off the appliance after each use, and unplug the power cable! Let the appliance cool, clean
it and store it at a dry, cool place!
29. The unit is intended for household use only. No industrial use is permitted!
30. Due to continuous improvements, the technical data and design may change without any prior
notice.
31. The actual instruction manual can be downloaded from www.somogyi.hu website.
32. We don’t take the responsibility for printing errors which may occur, and apologize for them.
Caution: Risk of electric shock! Do not attempt to disassemble of modify the unit or its
accessories. In case any part is damaged, immediately power off the unit and seek the
assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the
manufacturer, its service facility or similarly qualified personnel.
COMMISSIONING
1. Before installation, carefully remove packaging, and make sure not to damage the unit or the
connecting cable. If you find any damage, the unit must not be operated!
2. Set the device on a solid, level surface.
3. Observe the positioning clearances shown on Figure 2 ! Observe the requirements effective in the
country of use.
4. Plug the unit into a standard grounded wall socket. Now the unit is ready for operation!
5. When the device is connected to power supply, it starts heating the iron and the red light is lit. When
the green light is also lit, the device has reached the temperature required for making sandwiches.
Let the device operate empty for approximately 10 minutes.
6. A slight scent of smoke may occur during first use. This is not harmful and will stop soon.
7. Now the device is ready for use.
SANDWICH MAKING
1. Prepare the sandwiches using toast bread. Place the desired filling on the bottom slice, then cover
it with a second slice. Do not use too much filling, as it will make it hard to close the sandwich
maker, or the filling can burn on the cooking plate.
2. When the device has reached the temperature required for making sandwiches, the green light
turns on. The device will warm up faster with the lid closed.
3. Unlock the handle to open the lid of the sandwich maker. Do not touch the hot cooking plate.
4. Place the prepared sandwiches on the bottom cooking plate and slowly close the top cooking
plate. Secure the handles with the lock.
5. After approx. 2-3 minutes release the lock and open the top cooking plate. Remove the sandwiches
using a wooden or heat resistant plastic spatula. Do not use metal utensils to remove the
sandwiches, as those can damage the non-stick coating.
6. When finished making sandwiches, disconnect the cable from the wall socket.