Somnetics Transcend Sleep Apnea Therapy, Руководство пользователя

Страница: 27 / 43

Page 27 Transcend Sleep Apnea Therapy User Manual
Replacing the Filter Media
The Transcend Filter Media should be replaced every six months at minimum.
1.
Remove the Filter Frame by gently pressing the button release at the back of the
Filter Frame towards the front of the device. Then pull the filter frame away from
the device.
2.
To replace the Filter Media remove the used filter and discard. Lay a new Filter in
the channel on the base of the Transcend device.
3.
Reconnect the Filter Frame to the device by placing the front clip into place first.
Once the front clip is in place snap the back clip into place. Make sure the Filter
Frame is completely connected before use.
Note: If using an earlier generation of the Air Inlet Filter: Remove the Filter Frame (foam
will be attached) and discard. Replace with a new earlier generation Filter Frame.
Note: Earlier generation Air Inlet Filters and Filter Frames are not compatible with later
generation Transcend Systems.
1
2
3
Filter Frame
Filter Media