Sommer GmbH
14
o
Click
New Sensors (F6)
and wait until the search for the sensors is completed.
In the example shown on the right side three
sensors were found but not yet connected and
initialized.
If three devices are active this is exactly what
the screen should look like.
To identify the sensors please note the last four
digits of the sensor name, which show the TQ-
Amp ID.
The first part of the TQ-Amp ID may be
different to the ones shown in this example.
This part of the ID can be disregarded.
Every TQ-Amp is labeled with its ID.
