7
3.2. Control Panel
The RQ-30 ADMS offers the following control panel
Figure 2: Control Panel RQ-30 ADMS
3.2.1. Connector Data Logger
This connector is used to connect the datalogger with an USB-cable (RS-232) to the computer
to perform all the settings.
3.2.2. Connector Radar
This connector is used to communicate directly with the RQ-30 radar sensor. An USB to RS-
485 converter is shipped with your RQ-ADMS unit.
3.2.3. Connector Supply Voltage
This connector is used to supply the RQ-30 ADMS device. With this connection charging of
the internal batteries is performed. It is also possible to connect a solar panel for charging the
batteries.
3.2.4. ON / OFF switch
Switch Position
Function
OFF
The RQ-30 ADMS unit is switched completely OFF
ON
The unit is in standard mode of operation
1
Connector for direct communication with the
data logger (via USB to RS-232 cable)
2
Connector for direct communication with the
RQ (via USB to RS-485 cable)
3
Connector for the main supply voltage
4
ON / OFF switch
