11
4.3. Creating a Station with the communicaton assistent
The connection between the MRL-7 and a computer is established via the RS-232/USB
converter (provided with your RQ-ADMS unit) or via Bluetooth.
Make sure your USB-to-RS232 converter is connected to your PC or respectively that your
Bluetooth adaptor is turned on.
Start the Q-Commander Software.
In the right section of the program under the heading [Commands] chose [Communication
assistant]:
The following window opens:
Choose serial connection if you are using the
RS-232 to USB converter or choose Bluetooth if
used and press next
Make sure the RQ-ADMS is connected and
supplied, then press next
Check the dot that is marked with Logger
Select the checkmark “Scan ports”
proceede with [Next]
