Sommer & Maca Industries TTW 366, Руководство по эксплуатации и обслуживанию

Страница: 5 / 38

SECTION 1
SAFETY
FAILURE TO OBSERVE THE WARNINGS, CAUTIONS AND INSTRUCTIONS LISTED IN
THIS MANUAL AND ON THE DECALS ATTACHED TO THW GLASS WASHING MACHINE
COULD CAUSE SERIOUS INJURY TO PERSONNEL OR DAMAGE TO EQUIPMENT.
GENERAL SAFETY INFORMATION
Introduction
This manual contains instructions and operating and
maintenance procedures for Somaca Glass Washing
Machines (herein called “Washer”). The machines
must always be operated and maintained in
accordance with the instructions and procedures
contained in this manual. Only qualified personnel
thoroughly familiar with the operating and
maintenance instructions should operate and maintain
this equipment.
Safe Operating Considerations
Safety must be observed through all facets of
operation and maintenance. Proper tools and
operating procedures must always be used to prevent
accidents that could cause injury to personnel or
damage to equipment. Safe, reliable operation and
long service are dependent on three important
considerations:
1.
Care exercised during installation
The most important single factor of installation is
the alignment and leveling of one to three
sections (large machine) that comprise the
Washer. These must be installed properly on a
solid floor to maintain critical alignments.
2.
Quality and frequency of inspection and
maintenance
Frequent inspection and recommended
lubrication procedures must be performed to
ensure safe and trouble-free operation and
machine longevity.
3.
Common sense approach to operation
The Washer is not necessarily a complex device
due to its functionality and the flexibility it
offers; however, there is no witchcraft involved
in its operation. Patience and time spent in
acquiring familiarity with the aspects of
operation will reveal most of its secrets. The
most important rule is:
DON’T TAKE CHANCES!
NOTES, CAUTIONS AND WARNINGS
1.
Notes
The notes contained throughout this manual
provide additional information to carry out the
operating and maintenance procedures. Any
particular note is listed just prior to the
procedural step to which it applies. This is an
example of a NOTE format.
2.
Cautions
The cautions in this manual contain
instructions and information concerning
operation and maintenance procedures that, if
not followed, could cause damage to
equipment, parts and facilities. Like notes,
cautions are listed just prior to the steps to
which they apply. This is an example of a
CAUTION format.
3.
Warnings
The warnings in this manual contain
instructions and information concerning
operation and maintenance procedures that, if
not followed, could cause injury to personnel.
Warnings also are listed just prior to the steps
to which they apply. This is an example of a
WARNING format.
GLASS WASHING MACHINES
1