Sommer & Maca Industries TTW 366, Руководство по эксплуатации и обслуживанию

Страница: 19 / 38

SECTION 5
Auto-Tuning Procedure
GLASS WASHING MACHINES
15
The controller has been factory tuned at the time of
machine assembly. In the event that it is necessary
to retune, verify the proper water level in the tank(s)
and follow these steps:
Auto-Tuning is not necessary when the setpoint has
been adjusted.
Auto-Tuning may require as long as 1½ hours
because of the high thermal inertia of the water.
For more detailed information, refer to the manual
of the manufacturer of the controller.
OPERATION DISPLAY
Power ON Detergent temperature
Turn on DETERGENT HEATER ;
turn on SPRAY CHECK
Detergent temperature: pushbutton illuminated
Set the setpoint for 130
ºF
using the Setpoint
Adjustment above
Allow one (1) hour for detergent temperature to stabilize
at 130
ºF
Press SEL key for three (3) seconds ALM light blinks
Press SEL key until Auto-Tune parameter is reached AT appears (as “ A7 ”)
If a “ 1 ” does not appear next to AT , press UP key 1 (appears as “ A7 1 ”) Auto-Tune at 100% setpoint
Press SEL key
Auto-Tune indication lamp at lower right blinks
( Auto-Tune running)
Auto-Tune stops blinking Displays temperature and Auto-Tune indication stops
Controller automatically returns to operating mode