![background image](http://html.mh-extra.com/html/somfy/vsystempro/vsystempro_installation-instructions-manual_1317441077.webp)
EN
Copyright © 2016 Somfy SAS. All rights
reserved.
10
Note: This relay can be activated:
-
by pressing the button on the monitor.
-
by pressing a push-button connected to the PTE + GND terminals on the external module
terminal (option, see 6 - “Press to exit” button, page 11).
Switch 6
This switch enables the maximum conversation time with the monitor to be defined.
Position of the switch
Time
Position of the switch
Time
ON
1
2
3 4
5 6
7
8
1 min
ON
1
2
3 4
5 6
7
8
2 min
Note: switches 7 and 8 are not used.
5.2 Other settings
Adjusting the volume
Carry out a communications test with the monitor and adjust in the following order, using
a flat-head screwdriver:
Loud
speaker
volume
With someone talking normally in front of the
monitor, adjust the volume of the speaker by turning
the corresponding rotary switch.
Microphone
gain
Talk in front of the microphone and adjust the
microphone gain so that the voice is audible for the
person in front of the monitor.
Balance
Balance
Adjust the rotating switch so that there is no echo in
the external module speaker when someone speakes
into the microphone.
5.3 Adjusting the camera angle
Note: this operation is not required on the Premium model.
[1].
Open the external module housing frame.
[2].
Unscrew the camera locking screw.
[3].
Tilt the camera.
[4].
Tighten the locking screw.
[5].
Refit the external module frame taking care not to trap the
microphone wire.
[6].
Check the tilt angle of the camera, testing with a monitor.
[7].
Close the external module frame.
ON
1
2
3
4
5 6
7
8
Содержание VSYSTEMPRO
Страница 2: ......
Страница 133: ......
Страница 134: ...39 134 160 121 104 19 134 160 49 138 162 29 138 162 9020022 9020020 9020019 9020021 ...
Страница 135: ...39 134 281 19 134 281 49 138 283 29 138 283 9020025 9020023 9020024 9020026 ...