Copyright © 2019 SOMFY ACTIVITES SA. All rights reserved.
11
V500 io
EN
EN
4.2 io-homecontrol® EQUIPMENT WIRELESS CONTROL
The monitor is equipped with an io-homecontrol® transmitter. It is only compatible with appliances equipped with the
io-homecontrol® radio technology.
It is used to control the following Somfy devices, individually or simultaneously:
-
garage door drive,
-
lighting receiver,
-
roller shutter drive,
-
gate drive.
-
etc.
This functionality is enabled thanks to a radio channel system identified by columns (see “4.2.1 Home page”). Each channel
corresponds to an individual remote control and can be used to control one or more device(s). There is no limit to the number of
devices that can be controlled by a single channel. To control a channel, you just need to press on it.
Important
: Check that the device to be controlled is wireless and within the radio range of the monitor.
4.2.1 Home page
1
2
3
4
No.
Designation
Function
1
Upper control Open/switch on the
io-homecontrol® device.
2
Intermediate
control
Stop the io-homecontrol® device
in motion.
Set the io-homecontrol® device to
its favourite position.
No.
Designation
Function
3
Indoor
control
Close/switch off the
io-homecontrol® device.
4
Greyed-out
channel
The channel does not currently
contain any io-homecontrol®
devices.
4.2.2 Adding an io-homecontrol® device
To add an io-homecontrol® device, first press
from the home screen, then:
-
in the centre of the screen, if this is the first one you are adding
-
in the top right-hand of the screen, then
on the left to add your 2nd and subsequent ones
Once the adding procedure has been started, the monitor will guide you step-by-step. If in doubt, refer to the io-homecontrol®
device's instructions.
Содержание V500 PRO io
Страница 2: ......
