6
Copyright © 2017
SOMFY ACTIVITES SA
. All rights reserved
EN
SONESSE 30 WF RTS LI-ION
2. 4. TIPS AND ADVICE ON INSTALLATION
2. 4. 1. Questions about the drive?
Observations
Possible causes
Solutions
The driven product does
not operate.
Drive battery is low and requires
charge.
Charge the battery.
The control point battery is low.
Check the battery and replace it as
required.
The control point is not compatible
or not programmed.
Check the compatibility and replace the
control point as required.
The thermal protection has
activated.
Wait for the drive to cool down.
The driven product stops
too soon.
The end limits are incorrectly
programmed.
Reset the end limits.
The driven product has exceeded
recommended weight limit.
Replace driven product.
Battery is low.
Charge the battery.
Red LED blinks slowly for
3 seconds before and aGer
motor running.
Battery is low. Battery capacity is
less than or equal to 5%.
Charge the battery.
2. 4. 2. End limit readjustment
1
Control point must be paired to the driven product.
"
Green LED lights on for Up limit adjusting and blinks slowly for Down limit adjusting.
Readjusting the upper end limit
1) Briefly press the UP button, to move the driven
product to the upper end limit.
2) Press and hold the UP and DOWN buttons
simultaneously until the driven product briefly
moves Up and Down.
3) Press and hold the UP or DOWN button to move the
driven product to the new desired position.
4) To confirm the new position press and hold the MY
button until the driven product briefly moves Up and
Down.
1
2
3
4
