23
GB
INSTALLATION
4- Test pairing by pressing (
i
).
4 -
The product will activate if the procedure was successful. If not,
repeat steps 1 and 2 if necessary and re-test pairing.
5- Finish with (
ok
).
➡
Repeat the procedure from the start (“
System
>
Motors
>
Pairing
>
Add motors
” menu) as many times as there are
products to pair.
Deleting a motor
Select “
Cut out motor
” and confirm with (
i
) or (
ok
).
Select the motor to be deleted from the list and confirm with (
ok
).
The procedure for unpairing is performed as follows:
1- Press the (
Prog
.
) key on the local control (for approximately
2 seconds) until brief product movement is observed (a light
receiver blinks): then you have two minutes left to perform the
next step.
2- Press the (
Prog
.
) key on the Impresario Chronis RTS
remote control for 0.5 seconds. The corresponding
product is again activated (a brief movement or blinking)
confirming the end of the procedure.
3- Validate by pressing (
ok
).
2s
2s
2s
Local Control Options
5015235A-GB.qxd 25/01/07 15:11 Page 23
Содержание Impresario Chronis RTS
Страница 1: ...somfy com 5015235A Impresario Chronis RTS USER MANUAL GB ...
Страница 30: ...27 GB NOTES ...