SOMFY ilmo2 50 WT, Инструкция по эксплуатации

Страница: 11 / 36

9
EN
ILMO2 50 CSI WT
Copyright
©
2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
1. Prerequisite information 10
1.1. Field of application 10
1.2. Liability 10
2. Installation 10
2.1. Assembly 10
2.2. Wiring 12
2.3. Commissioning 13
2.4. Tips and advice for installation 13
3. Use and maintenance 15
3.1. Operating the control point 15
3.2. Operating the emergency crank 15
3.3. Tips and recommendations for use 15
4. Technical data 16
TRANSLATED INSTRUCTIONS
These instructions apply to all ILMO2 50 CSI WT drives, the different versions of which are available in the current
catalogue.
CONTENTS
GENERAL INFORMATION
Safety instructions
Danger
Indicates a danger which may result in immediate death or serious injury.
Warning
Indicates a danger which may result in death or serious injury.
Precaution
Indicates a danger which may result in minor or moderate injury.
Attention
Indicates a danger which may result in damage to or destruction of the product.
INTRODUCTION
The ILMO2 50 CSI WT is a drive requiring no adjustment: a simple connection is all that is required.
The ILMO2 50 CSI WT programs its end limits automatically.
The ILMO2 50 CSI WT can be installed either on the right or the left. It is operated via a control point
with a fixed position or momentary action-type switch.
The ILMO2 50 CSI WT is equipped with a back-up system used to open and close the roller shutters in the event of a
power outage: the roller shutter can be opened and closed manually using a special emergency crank.