SOMFY Home Motion LEVIXO 30 RTS, Руководство по установке

Страница: 28 / 76

8
Copyright © 2011 Somfy SAS. All rights reserved.
EN
Levixo 30-50 RTS
4.6. fitting the rubber edge (option)
- Position cover C1 by sliding it along the boom.
- Cut the rubber edge with an extra 2/3 cm over the length
of the boom to be protected.
- Slide the rubber edge into the groove provided.
- Position cover C2.
Note: We recommend securing the rubber edge to covers C1
and C2 using silicone adhesive to join the assembly
together and allow it to slide freely in the boom profile.
1
2
4
5
3
SX DX
4.5. mounting the boom
- Mount the boom in the open position (vertically).
- Secure the boom
4 , using the bracket 1 with the bolts and washers provided
3
, on the boom support
2
.
The boom should be positioned so that the double profile
5
is facing downwards.
The bracket 1 must be properly aligned with the boom support
2
.
- The balance is set for a nominal boom length (3 m for Levixo 30 / 5 m for Levixo 50). If the boom is cut, balance the boom
as indicated in paragraph 4.7.