SOMFY Home Motion LEVIXO 30 RTS, Руководство по установке

Страница: 27 / 76

Copyright © 2011 Somfy SAS. All rights reserved.
7
EN
Levixo 30-50 RTS
6
L R
90°
7
L R
1
2
4.4. mounting on the right (opposite of factory mounting)
The operation involves moving certain internal components as follows, in order to mount the barrier on the right:
Before performing any operations inside the housing, it is essential to ensure that the spring is released by
moving the boom to the vertical position.
Lock the boom by placing the key in the padlock closed position .
90°
80Nm
L R
1
2
5
3
4
4
180°
80Nm
L R
1
2
5
3
4
90°
80Nm
L R
1
2
5
3
4
4
90°
80Nm
L R
1
2
5
3
4
4
- Slacken the spring tensioner
1
completely using a Ø19
spanner until the bolt and nut
2
securing the base of
the housing can be removed.
- Remove the bracket
3
and loosen the bolt
4
using a
Ø19 spanner (with a tightening offset of at least 40 mm)
until the lever
5
begins to rotate.
- Pull and turn the lever
5
180°.
Note: Only one position is possible at 180°, and is
indicated by a notch.
Be sure not to damage the end limit contacts.
- Tighten the bolt
4
which immobilises the lever using a
torque wrench set to a torque of approximately 80 Nm.
- Place the unlocking key 6 in the manual operation
position (padlock open )
- Turn the boom support plate
7
90° anticlockwise by
hand.
- Lock the boom by placing the unlocking key 6 in the
padlocked closed position .
- Lock the spring tensioner
1
in the position (mark R)
using the self-locking bolt and nut
2
.
Be sure to reposition the part 8 located between
the spring tensioner and the spring.
- Adjust the spring tensioner
1
to lightly tighten the
spring.
- In the control unit, reverse the black and brown wires of
the motor operating connections (terminals 3 and 5).
8