16
EN
2
Commissioning and standard use
EN
- FREEVIA LINE installation and operating guide - SOMFY
2.3 Standby / reactivation of the control electronics
2.4 Plugging the openings
To check if the motor is switched on or to check/
modify the parameter setting, press the
button
for 2 seconds to reactivate the electronics
.
Once all the cables have been fed through, plug the
openings (oblong holes, cable feed openings) using
silicone.
Once the self-learning process has been
completed, the electronics automatically switch
to standby aer 5 minutes of inactivity to save
energy.
In standby mode, all indicator lights are
switched off.
You are strongly advised to plug all the openings
to avoid short circuits caused by insects.
2.5 Liing the cover
2
1
1.
Place the cover on the motor bracket (base).
2.
Insert the seal
to ensure the motor and
cover screw
are watertight.
3.
Fasten the cover.
