SOMFY Freevia 280, Руководство по эксплуатации и установке

Страница: 10 / 37

8
EN
fitting the end stops ►
The gate must be stopped by end stops which are securely fixed to the ground and which
delimit the end of travel.
base ►
The lag screws for mounting the
motor must be securely anchored to
the ground. The type and dimension
of the base depends on the nature
of the ground. Allow for the supply
cable to be fed through according to
the electrical standards in force in
the country of use.
1. PrEPariNg ThE basE
steps
Positioning the motor •
Fitting the end stops •
Base •
Positioning the motor ►
horizontal position
Ensure that the motor is always positioned in the field of the gate when opening and closing.
vertical position
Ensure that the motor
is raised off the ground
slightly (over 20 mm).
Rac
k
min. 250 mm
min. 200 mm
Gate
Base
Base
G
at
e
cable feed