28
FULL INSTALLATION
Warning! From Step 1 to Step 3, you must use a test lead to operate the rolling garage door.
Do not connect the FREEROLL control unit until the end-limits have been set.
1. Set Motor end-limits
Test lead (ex. Ref. 9686027)
Set the UP and DOWN end-limits of the RDO CSI motor with
a test lead (not-provided) connected as mentioned above.
Refer to the motor instruction guide.
Remove the protective cover from the end-limit switch
housing.
Set the UP end-limit switch in accordance with the RDO
CSI motor instructions.
Set the DOWN end-limit switch in accordance with the RDO
CSI motor instructions.
Replace the end-limit switch protective cover.
Standard connections for right hand
mount and rolling door cover internal
garage mount.
Black: close
Blue: neutral
Brown: open
Green/Yellow: earth
For left hand mount or outside cover
swap brown and black.
