12
EN
- Replacing the EXAVIA 500 / WISPA 800 / SGS 201SGS 400 / SGS 501 electronic unit - SOMFY
EN
6.8 Remote antenna
6.9 Solar power supply
The antenna wire can be replaced with a remote antenna with a greater
range.
This is placed on top of the pillar and must be clearly accessible.
It is connected to terminals 1 and 2 (blue "ANT" label) on the control unit:
•
the wire core on terminal 1,
•
the ground strap on terminal 2.
When the motor is running on the solar feed:
•
only the remote controls and radio control points can be used to control
the gate (wired controls are deactivated),
•
the wired safety accessories (photoelectric cells, flashing light) remain
active.
6.7 Videophone
NC COM NO
This accessory is not compatible with solar power.
Only connect one non-powered dry contact.
Never connect your motor to a 230 V power supply when it is connected
to a solar power supply, as this may damage the motor's electronics
unit.
