SOMFY Elixo 500, Руководство по установке

Страница: 15 / 60

Copyright © 2008 Somfy SAS. All rights reserved.
13
EN
Elixo 500 24 V
display of the motor torque values during operation of the motorisation
During the opening and closing phases, four figures separated by a dot are displayed on the screen, for example 35.40. The
figures are updated whilst the gate is moving. They represent the actual torque used (35) and the torque set during the self-
learning procedure (40).
These values enable the torque entry to be corrected.
If the value of the actual torque used during movement of the gate more or less approaches the value of the programmed torque,
operating faults may occur in the future, due to wear or slight warping of the gate.
If the value of the actual torque used exceeds the value of the programmed torque, the gate will stop and reverse by several
centimetres.
motor
Power supply 230 V 50/60 Hz
Motor power supply 24 Vdc
Motor revolutions 3500 rpm
Power consumption 70 W
Maximum consumed current 0.5 A (23 Vac) - 1 A (110 Vac)
Reduction ratio 1/44
Revolutions at output 79 rpm
Pinion 4 mm module (14 teeth)
Gate speed 12 m/min
Maximum weight of the gate 500 kg
Maximum torque 20 Nm
Lubrication Permanent grease
Manual manoeuvres Mechanical release with handle
Obstacle detection Electronic torque limiter
Number of cycles/day 30
Control unit Built in with LCD display
Backup batteries (optional) Two 12 V 1.2 Ah batteries
Operating temperature -15 °C to +60 °C
Index protection rating IP24
Weight 7 kg ( ~ 70 N)
Dimensions see “General motor size” pg.3
ElECtroNiCs
Accessories power supply 24 Vac (180 mA)
Automatic closure time between 3 and 120 seconds
Operating time 120 s
Pedestrian opening time 7 seconds (fixed)
Reversal pause 1 second approximately
Integrated flashing amber light connection 24 V maximum 25 W
Fuses 250 V T 0.62 A and T 1 A
Built in radio receiver RTS
Number of memorizable remote controls 36
RTS remote control frequency 433.42 Mhz
Aerial resistance 50 Ohm (RG58)
tEChNiCal sPECifiCatioNs