Copyright © 2008 Somfy SAS. All rights reserved.
5
EN
Elixo 500 230 V
installing the motorisation
fitting the mounting system
The motor mounting kit provided is to be used on a concrete
base. For all other types of mounting, use the appropriate
fittings.
Position the base plate:
[1]
parallel to the gate,
•
with the symbol on the pinion pointing towards the gate,
•
by moving it by 25 mm in relation to the front line of the
•
rack (if the rack is fitted with a cover, measure from the
line on the rack, not on the cover),
so that it does not obstruct movement and to ensure the
•
gate is able to open and close completely.
Mark the location for the ground mountings.
[2]
Drill to a depth of 85mm.
[3]
Insert the plugs.
[4]
Tighten the lag screws on:
[5]
the threaded section for a rack height of between 110 and
•
130 mm,
the threaded s the unthreaded section for a rack
•
height of between 100 and 110 mm.
Screw a nut onto each lag screw.
[6]
Place the base plate onto the lag screws with the symbol
[7]
on the pinion pointing towards the gate. It must be a
minimum of 23 mm from the ground.
mounting the motor
Position the motor on the lag screws, insert it and push it
[1]
towards the gate.
Ensure the pinion is correctly positioned under the rack
[2]
Set the height of the motor and/or the rack to ensure a
[3]
clearance of approximately 2 mm between the rack and the
pinion. This setting is important to prevent premature wear
of the pinion and rack; the pinion must not be supporting
the weight of the gate.
Check:
[4]
that the setting nuts all come into contact with the base of
•
the motor,
the motor is level,
•
the gate runs correctly,
•
the clearance between the rack and pinion does not vary
•
significantly over the gate’s travel.
Fit a washer and nut onto each lag screw in order to fit the
[5]
motor.
25 mm
14 mm
To facilitate tightening of the lag screws, use 2
nuts to form a “double nut”.
h
25
>23
h
100
130
85
77
h
25
50
>23
h
100
130
2 mm
60 mm
20 mm
55 mm
100 mm<h<110 mm
110 mm<h<130 mm
NO
OK
Содержание Elixo 500 230 V
Страница 43: ......
