SOMFY Elixo 500 230 V, Руководство по установке, Страница: 12 / 44

10
Copyright © 2008 Somfy SAS. All rights reserved.
EN
Elixo 500 230 V
Press the PROG button on the motorisation control unit for more than 7 seconds. The indicator light flashes to indicate that all
remote controls have been cleared.
The auto-diagnostic LEDS, located on the control unit terminal, control the
operation of the motor and its additional devices.
DL2 START - lights up on the START command
DL3 STOP - goes out on the STOP command
DL4 PHOT - goes out if the photoelectric cells are not aligned or if they are
obstructed
DL5 SWO - goes out on the opening end limit command
DL6 SWC - goes out on the closing end limit command
motor
Power supply 230 V 50Hz
Motor power supply 230 V AC
Motor revolutions 1400 rpm
Power consumption 290 W
Maximum consumed current 1.5 A (230 V) - 3 A (110 V)
Capacitor 10 μF (230 V) - 40 μF (110 V)
Thermal protection 110°C
Insulation category F
Reduction ratio 1/30
Revolutions at output 48 rpm
Pinion 4 mm module (14 teeth)
Gate speed 8.5 m/min
Maximum weight of the gate 500 kg
Maximum torque 20 Nm
Lubrication Permanent grease
Manual manoeuvres Mechanical release with handle
Number of cycles/day 100
Obstacle detection Friction clutch
Control unit Integrated
Operating temperature -15 °C to +60 °C
Index protection rating IP24
Weight 15 kg
Dimensions see “General motor size” pg. 3
ElECtroNiCs
Accessories power supply 24 V (0.2 A maximum absorbed)
Automatic closure time between 0 and 90 seconds
Operating time between 0 and 120 seconds
Pedestrian opening time 7 seconds (fixed)
Reversal pause 1 second approximately
Flashing orange light connection 230 V maximum 15 W
Fuses 250 V T 0.62 A and T 1 A
Built in radio receiver RTS
Number of storable remote controls 36
RTS remote control frequency 433.42 Mhz
Aerial resistance 50 Ohm (RG58)
ClEariNG all rEmotE CoNtrols
diaGNostiCs
tEChNiCal sPECifiCatioNs