EN
Copyright © 2016 Somfy SAS. All rights reserved.
3
2 PRESENTATION OF THE MONITOR
2.1 General description
The video monitor must be combined with at least one external module to visualise and talk to a visitor.
Depending on your installation, it also allows communication between two monitors.
This monitor is equipped with buttons which can be used to:
-
answer or reject a visitor’s call
-
talk between several monitors in the same dwelling
-
activate a motorised gate, an electric lock or other peripherals
-
activate RTS Somfy products
2.2 Presentation of the monitor
3
11
12
16
17
13
14
15
6
7
4
5
1
3
2
8
9
10
Back of the front panel
Front panel
No.
Description
1
LCD screen - 800 x 480 pixels
2
Communication and control b
visualisation LEDs
3
Speaker
4
Microphone
5
RTS control
6
Removable terminal block 1
7
Removable terminal block 2
8
BUS line selector
9
Address switch (8 selectors)
No.
Description
10
Multi-monitor configuration switch (4
selectors)
11
Brightness setting thumb-wheel
12
Buzzer level selector
13
Conversation volume setting thumb-wheel
14
RTS control battery
15
RTS programming button (PROG)
16
Contrast setting potentiometer
17
Colour setting potentiometer
2.3 Operation of the buttons
Operation of the RTS control (no. 5)
Open button: press briefly to open the relative product (roller shutter, awning, garage door, etc.) or to switch
the light on.
Stop button: press briefly to stop the relative product.
Close button: press briefly to close the relative product or switch the light off.
Selecting the channel: press the number of times required to activate the desired channel.
Note: channel 5 corresponds to 4 LEDs lit.