SOMFY 1115202, Руководство по установке

Страница: 15 / 80

Copyright © 2009 Somfy SAS. All rights reserved.
Sunea CSI RTS
13
EN
4. Wiring
Switch off the power supply. -
Connect the motor according to the information in the -
table below :
230 V ~ 50 Hz Motor cable
1
Brown Live (P)
2
Blue Neutral (N)
3 Green-Yellow Earth
5. Commissioning
This guide describe only the commissioning using a RTS control point as Telis 1 RTS.
For commissioning using other RTS control point, refer to the corresponding guide.
5.1 Identifying setting steps already completed
Only one motor can be powered at a time.
Do not use the Inis RT/Inis RTS control point for
commissioning.
Switch the power on and follow process «a» or «b»
depending on the awning reaction :
a
The awning makes a brief movement.
The end limits are set and no RTS control point is
programmed. Go to chapter « Programming the first
RTS control point ».
or
b
The awning does not move.
Press the Up or Down button and follow process «c» or
«d» depending on the awning reaction.
c
The awning still does not move
The end limits have not been set and no RTS control
point is programmed.
Go to chapter «
Pre-programming the RTS control
point ».
or
d
The awning goes fully up or fully down
The end limits have been set and the RTS control
point is programmed.
Go to chapter «
Use »
5.2 Pre-programming the RTS control point
Press the Up and Down button simultaneously: the -
awning makes a movement, the RTS control point is
programmed in the motor.
1
2
3
1
2
3
OFF
230 V
~
50 Hz
3 x 1,5 mm 2
3 x 0,75 mm
2
ON
Programming
the first
RTS control point
c
or
d
Pre-programming
the RTS control point
Use