Somat SPC-75S, Руководство по эксплуатации и обслуживанию

Страница: 28 / 66

SHUTDOWN PROCEDURES - The following shutdown procedures must be followed
prior to performing necessary cleaning and maintenance duties.
1. Allow the Pulper to operate approximately fifteen minutes after the last waste
has been fed.
2. Depress black “ TIMED STOP ” pushbutton once to engage spray rinse system,
system will then time out on its own. The Pulper will stop when the shutdown
timer has timed out.
3. Press “ DRAIN EMPTY ” pushbutton on panel door to drain system. This
pushbutton will DRAIN ONLY , you must press GREEN start button to close
drain. This will pre-fill the system again.
4. Lock in the STOP button lock and turn power off to perform any cleaning or
maintenance.
5. Refer to the applicable Pulper and Hydra-Extractor

maintenance sections of
this manual for daily, weekly and long term shutdown cleaning procedures and
maintenance instructions.
***To ensure all food waste is removed from the extractor, you can use Styrofoam plates
as a cleaning agent for the unit. The Styrofoam will force out the majority of food waste
leaving only Styrofoam. Run the plates as you would any waste, and continue until
nothing but Styrofoam exits the extractor. We do not recommend using cardboard as it
will dry out and create a very hard obstruction in the extractor which could cause motor
overload on restart.***
*Print sequence of operation on next page for display for operators.*