Somat DH-100, Руководство по эксплуатации

Страница: 13 / 23

13
Quick Guide
Check Shaft Rotation:
Looking at side
electrical panel*
Clockwise rotation for UNLOADING
Counter-Clockwise rotation for
NORMAL operation
Check Drain Line
Make sure drain line is route to a floor drain and not kinked, damaged, or
obstructed In any way.
Condensate is pumped out of the system, if line is blocked backups will occur.
Check Electrics
Use the touch screen for all controls. All set-points are preset at the factory. Call
Somat
® if these set-points need to be adjusted.
Check Clearance
Make sure unit is placed NO CLOSER than 12” from a wall. Proper air circulation
is required.
Clean Air Filter and Gasket Area After Every Cycle