SOLZAIMA SZM A PLUS 16 kW, Инструкция по эксплуатации

Страница: 9 / 87

5

Do not tamper with safety or adjustment features without the manufacturer's
authorization;

Do not cover or reduce the size of the vents at the installation area;

The pellet-run boiler requires good air supply to guarantee correct combustion; as
such, if the unit is kept in an air tight environment or is exposed to other existing
sources of air extraction, its correct functioning may be impeded;

The existence of vents is a requisite for proper combustion;

Do not leave the packing materials near children;

When the unit is operating normally, the boiler door cannot be opened;

Avoid direct contact with parts of the unit that tend to become hot during
operation;

Check the existence of any obstructions on the fume duct before turning on the
unit after a long period of inactivity;

This pellet-run boiler is intended for residential use, within a protected
environment. Safety systems may intervene to shut down the boiler. If this occurs,
contact technical assistance. In any circumstances should you attempt to interfere
with the safety systems;

The pellet-run boiler is a biomass heating unit equipped with an electric fume
extractor. The occurrence of any power failure during its use may prevent fume
extraction and the room will be filled with smoke. For this reason, you should have a
natural fume extraction system, like a chimney, available;

If you intend to use your boiler when leaving it unattended or while you are away
from home, it is advised that you utilise the safety system specified above to
guarantee its safe functioning in the eventuality of a power failure;

While in operation, NEVER disconnect the electric plug of your pellet-run boiler.
Seeing as the boiler's fume extractor is power-operated, disconnecting the plug would
prevent the extraction of combustion fumes;

Your unit must be disconnected from the mains for servicing. Before doing this,
the unit must be totally cooled down (if operating before);

Never touch the interior of the boiler without first disconnecting it from the power
mains;

The maximum water temperature (set-point temperature) that the user can set for
the boiler is 80°C. In the event of the boiler reaching a temperature of 90ºC, it will
automatically switch off and activate a corresponding alarm A18 (excess water
temperature);