SOLZAIMA K50, Инструкция по эксплуатации, Страница: 34 / 64

33
cleaner, clean the ash accumulated inside the combustion chamber, if a small brush is
necessary to remove the most ingrained ash. Replace parts in reverse order.
a) Cover removal b) Screws removal c) Side covers removal
Figure 22 – Removal of top and sides
a) Inferior grill removal b) Frontal removal c) Frontal opening smoke path
Figure 23 – Grill removal
a) Removal side cover b) Front Vacuum c) Lateral vacuum
Figure 24 – Removal of the side cover and cleaning of the fume passage
12.2.3. Cleaning the fume circuit K50
To perform this cleaning it is necessary to remove the front vermiculite (refractory
material) from the inside of the combustion chamber, remove it from the fittings that
are in the smoke deflector, if necessary remove the side vermiculites. Then remove the
smoke deflector, remove its fittings in the holes in the combustion chamber. With the
help of a small steel brush (a 20-25mm diameter steel brush is recommended) remove
the ashes in the passage of fumes that are difficult to access and the more ingrained
ashes that are found in the walls of the combustion chamber. Use the vacuum cleaner