78
starts to flash. Press the “+” or "-" key to increase or decrease (from -10 to +10), as
required. Each unit must be multiplied by 2,5 to obtain the correct percentage. Press
“ok” to confirm. Press “esc” to return to the “Receita de pellets” (Pellet recipe) menu
and then press “+” to go to the “Carga pellet” (Pellet loading) menu.
•
Pellet loading (this function only appears with the machine in Off)
This feature allows you to enable the
worm drive
to fill the channel when it is empty
to keep the unit running. Press “set”; the “ok” option appears. Press “ok” to activate
the drive; the message “habilitada” (Activated) appears. Press “esc” to stop. Press the
“+” key to go to the “Limpeza” (Cleaning) menu.
Important notice:
When there are no more pellets in the unit while it is in operation,
you should
ALWAYS
use this function to refill the worm drive channel.
•
Cleaning (this function only appears with the machine in Off)
This feature allows you to
clean
the burning basket manually. Press “set”; the “ok”
message appears. Press “ok” to start the cleaning procedure; the “Habilitada”
(Activated) message appears. To stop, press “ok”. Press the “+” key to open the
“Técnico” (Technical) menu.
ON
OFF
+
OK
MENU
MODE
ESC
-
MAN
AUT
esc
Set
<
Limpeza
>
Содержание Everest
