SOLZAIMA Atlantic, Инструкция по эксплуатации, Страница: 60 / 105

59
14.3. Installing the external control
To use an external command, it is required to connect it to the interface board,
which is located next to the space for the WI-FI module on the right-hand bracket.
Figure 38 – Interface location
The interface board has 4 different inputs, JA and JB are connections that are used
to establish contact directly with the electronic board, for example to access the
software from a computer or make updates and JC, are the ones we would use for
external control.
Figure 39 – Interface
This board has two inputs on JC "remote" and "therm". When working with the
"Remote" contact, the insert will be activated when it receives (NC contact closed)
and will stop (NO contact open).