SOLZAIMA Atlantic, Инструкция по эксплуатации, Страница: 18 / 105

17
6.5. Connections

Connect the 100 mm diameter pipe between the flue gas outlet and the flue
outlet to the outside of the building (point 8 diagrams);

If you use a pipe for the intake of the combustion air coming from outside, it
must not be longer than 60 cm horizontally and must not have been altered (e.g.
no bends);

Install the hydraulic system (see point 8.3);

As you may have noticed, the machine body is connected to the chassis with
flexible hoses. These hoses must remain in the left side of the insert in the working
position to ensure that they do not become strangled and that they can be easily
pulled out when you want to remove the insert.

Connect the 230 VAC power cable to a grounded electrical outlet, making sure
it is long enough to remove the equipment easily.

Make sure that when placing the equipment in its working position the
electrical cable cannot come into contact with the box or the flue, we recommend
that the socket is at the back of the front wall to avoid this problem.

The machine has a chrono-thermostat on the control. Optionally, a
conventional external programmer (not included) can be used to automatically
define the operating periods of the machine.