manualshive.com logo in svg

Solwise SSR725, Инструкции по установке

Поделиться
Скачать
Solwise SSR725 Скачать руководство пользователя страница 7

 

 

7

 

1 Introduction 

1.1  

Overview 

The SSR SDSL Router features multi-mode SDSL technology that 
provides a downstream rate of up to 8M bps over existing copper 
wire lines, which is more than 100 times faster than a traditional 56K 
analogue modem. The 725 model can be connected to your PC or 
LAN through the 10/100Base-T Ethernet interface and includes a 4-
port 10/100 switching hub. The 705 model can also be connected to 
your PC or LAN but has a single 10/100Base-T port only. 

It is designed to meet both the needs of single user, and multiple 
users at small office and home office who want fast Internet access. 
A wide variety of features and interoperability offer scalability and 
flexibility for all the applications 

1.2   Features and Compatibility 

The SSR series Router provides the following features: 

 

• 

Full rate maximum2.3Mbps speed (G.SHDSL) connection.  

• 

Simple configuration through HTTP and TFTP and configuration file. 

• 

IEEE 802.3 & 802.3u over UTP (10/100Base-T) compliant 

• 

Operation with up to 4.6Mbps downstream and upstream simultaneously enables 
High-Speed access to Internet Service Provider (ISP) or corporate network 

• 

Friendly GUI Configuration and Management software 

• 

Supports G.SHDSL always-on 

• 

Ongoing feature enhancements through TFTP download or upload of new firmware 
and configuration files 

• 

Supports multiple PVC up to 8 PVCs for RFC 1483 and ATM Forum UNI 3.0, 3.1 and 
4.0 signaling for SVC 

• 

Supports full VPI range (8 bits, 0-256) and VCI range (16 bits, 1-65535) over PVC. VPI 
is limited to VPI 0 only over SVC. 

• 

Enables end-to-end ATM support, which allows traffic management and QoS. 

• 

Built-in DHCP server automatically assigns IP addresses to all workstations on your 
LAN. 

• 

All management and monitoring can be done through SNMP or Telnet session. 

• 

Multi-mode SDSL technology supports ITU-T G.hs, G.dmt, G.lite and ANSI T1.413 
issue 2 to provide interoperability with most DSLAM equipment. 

• 

ATM (Asynchronous Transfer Mode) protocol allows the QoS(Quality of Service)  
transmission over a network 

Содержание SSR725






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды