•
TCP/IP protocol is installed. If not, use
Add - Protocol - Microsoft - TCP/IP
to
install it.
•
Check the network Bindings:
•
Ensure the TCP/IP protocol is bound to your Network card (NIC).
Select your Network card, click
Properties
, and then the
Bindings
tab. If
TCP/IP is not bound (checked), check it.
•
Ensure the
TCP/IP -> Network card
entry is bound to the
Client for Micro-
soft Networks
service.
Select the
TCP/IP
entry for your Network Card, click
Properties
, and then the
Bindings
tab. If
Client for Microsoft Networks
is not bound (checked), check
it.
•
If you don't have a router, check that your IP Address is compatible with the
interNAS/USB Server's. This means it needs to be from the same address range
(e.g. 192.168.0.1 to 192.168.0.254) and using the same
Subnet Mask
(e.g.
255.255.255.0)
•
If you DO have a router, check that your
Gateway IP Address
is set correctly. Ask
your LAN administrator for the correct value.
Problem 3
When I click on an interNAS/USB folder icon in
Network Neighborhood
, I get
prompted for a password.
Solution 3
This can happen in the following situations:
•
The Logon name you used on your PC is recognized by the interNAS/USB, but
the password is not. Simply enter your interNAS/USB password, or make your
Windows password the same as the interNAS/USB password.
•
The logon name you used on your PC is NOT recognized by the interNAS/USB,
and was converted to
guest
, with
guest
access rights. Ask the interNAS/USB Ad-
ministrator to create a
user name
for you. (Use the same name as on your PC.)
Page 65
