User Manual
6
Installation
side must be open.
Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
Countertop Installation
Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
1.
Select a level surface that provide
enough open space for the intake
and/or outlet vents
.
A 10-cm spacing should be kept between
the appliance and right and back walls,
and a 30-cm spacing kept on the top.Never dismantle
the applicance's feet ,nor block the air intake and
exhaust opening.
can damage the oven.
) Place the oven as far away from
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or TV
reception.
outlet. Be sure the voltage and the
frequency is the same as the voltage
and the frequency on the rating label.
1) Blocking the intake and/or outlet openings
2
3 Plug your oven into a standard household
)
Fig 1
(
)
Fig
1
ure
30cm
OPEN
eft
The l
12
inch(
)
4.0 inch(10cm)
4.0 inch(10cm)
4
）
Warning: T he plug socket,electric
appliances or the appliance which are
liable effected by heat and moisture should
be kept away from any vents on the oven.
8
2. Stacking and installation of the microwave oven.
The maximum height of stacking shall be two
layers. Specific stacking installation is as follows
(A) Unscrew and remove the mounting plate, and then
tighten the screws.
(B) Remove the four screws as shown in Figure.
(C) Mount the mounting plate to the lower position and
fix the screws that are just loosened.
Installation
side must be open.
Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
Countertop Installation
Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
1.
Select a level surface that provide
enough open space for the intake
and/or outlet vents
.
A 10-cm spacing should be kept between
the appliance and right and back walls,
and a 30-cm spacing kept on the top.Never dismantle
the applicance's feet ,nor block the air intake and
exhaust opening.
can damage the oven.
) Place the oven as far away from
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or TV
reception.
outlet. Be sure the voltage and the
frequency is the same as the voltage
and the frequency on the rating label.
1) Blocking the intake and/or outlet openings
2
3 Plug your oven into a standard household
)
Fig 1
(
)
Fig
1
ure
30cm
OPEN
eft
The l
12
inch(
)
4.0 inch(10cm)
4.0 inch(10cm)
4
）
Warning: T he plug socket,electric
appliances or the appliance which are
liable effected by heat and moisture should
be kept away from any vents on the oven.
8
2. Stacking and installation of the microwave oven.
The maximum height of stacking shall be two
layers. Specific stacking installation is as follows
(A) Unscrew and remove the mounting plate, and then
tighten the screws.
(B) Remove the four screws as shown in Figure.
(C) Mount the mounting plate to the lower position and
fix the screws that are just loosened.
Countertop Installation
Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not
install if oven is damaged.
Cabinet: Remove any protective film found on the microwave cabinet surface.
1)
Select a level surface that provides enough open space for the intake and/or….Never remove the appliance’s feet or
block the air intake and exhaust opening. The left side must be left exposed.
A) Blocking the intake and/or outlet openings can damage the oven.
B) Place the oven as far away from radios and TV as possible. Operation of microwave oven may cause
interference to your radio or TV reception.
C) Plug your oven into a standard household outlet. Be sure the voltage and the frequency is the same as the
voltage and the frequency on the rating label.
WARNING:
The plug socket, electric appliances, or items which may be effected by heat and moisture should
be kept away from any vents on the oven.
2) Stacking and installation of the microwave oven. Do not stack more than two microwave ovens together. Specific
stacking instructions are as follows:
A) Unscrew and remove the mounting plate, and then tighten the screws.
B) Remove the four screws as shown in Figure 2.
C) Secure the mounting plate to the lower microwave oven and tighten the screws.