User Manual
11
Double Quantity Cooking
1. Through use of the X2 pad, the user can easily set the time for a particular food item.
2. If the “X2” button is pressed in ready mode or within 5 seconds of starting a Preset Program, the oven will start
cooking with the quantity preset cooking time.
3. This function can be used under Preset Program Mode.
Stage Cooking Programming
1. This mode allows users to cook food items at manual cook mode and programming mode.
2. Up to 3 stages can be set under Cooking Mode or Programming Mode.
3. After setting the power and time for the first stage, press “Time Entry” to set the second stage
4. When setting the second and third stages, “STAGE-2” and “STAGE-3” will display.
Use Option Mode
1. This mode allows the user to choose various ways for the oven to operate.
2. Open the door and press “2” pad for 5 seconds. The buzzer will sound once.
3. The screen will display “OP: - -“
4. Press any number button to enter related mode setting.
5. Press “START” to save the current setting. After it is saved, “OP: - -“ will display again.
6. If “START” button is not pressed at the last step, the program cannot be saved.
Service Mode
1. Open the oven door and press the “3” pad for 5 seconds to enter Service Mode.
2. The screen will display “SERVICE.”
3. To check the times of closing or opening the door, just press number button “3” and the screen will display.
4. Press the “1” pad for Tube Hours.
5. Press the “2” pad for Tube Cycles.
6. Press the “3” pad for Door Cycles.
7. Press the “4” pad to clear service information.
Factory Default Setting
1. In the Ready Mode, press “START” and “0” to restore factory default setting.
2. The buzzer will sound once and the screen will display “CHECK.”
3. If it is in the factory default setting, the screen will display “11” and after 3 seconds the oven will turn to Ready Mode.
4. If it is not in the factory default setting, the screen will display “00.”
5. Press “START” and the screen will display “CLEAR.” After self-testing, the screen will display either “11” or “00.”
6. If the user does not press “START” when the screen reads “00,” the setting will cancel.
7. Please use caution as this operation can restore all configurations to the factory default setting.
