User Manual
6
Countertop Installation
Instructions
1. Remove all packing material and accessories.
2. Examine the oven for any damage such as dents or a broken door. Do
not install if oven is damaged.
3. Select a level surface and provide enough space for intake and/or
outlet openings.
a. 4in. spacing should be kept between appliance and right and
back walls.
b. 12in. spacing should be kept on the top.
c. The left side must be open.
4. Place the oven as far away from radios and televisions as possible.
5. Plug oven into standard household outlet. Be sure the voltage and the
frequency are the same as what is listed on rating label.
6. Make sure the plug socket is kept away from any vents on the oven.
Appliance can be installed with a degree of overlap (see Figure 2).
The maximum overlap height is two layers.
Installation
1. Select a level surface that provide enough open space for the intake
and/or outlet vents (Figure 1).
A 4in. spacing should be kept between the appliance and right and
back walls, and a 12in. spacing kept on the top. Never dismantle the
appliance's feet, not block the air intake and exhaust opening. The left
side must be open.
A. Blocking the intake and/or outlet openings can damage
the oven.
B. Place the oven as far away from radios and TVs as possible.
Operation of microwave oven may cause interference to your
radio or TV reception.
C. Plug your oven into a standard household outlet. Be sure the
voltage and the frequency is the same as the voltage and the
frequency on the rating label.
D. WARNING: The plug socket, electric appliances or the
appliance which are liable effected by heat and moisture should
be kept away from any vents on the oven.
2. The appliance can be installed with a degree of overlap (Figure 2).
The maximum overlap height is two layers.
A. Loosening screw, taking off installation board, then replacing
screw in its place tightly.
B. Taking off four screws as shown in the picture.
C. Putting installation board to the following location then fixing
screw just taking off tightly.
Installation
Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
Countertop Installation
Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
Do not remove the light brown Mica cover
that is attached to the oven cavity to
protect the magnetron.
side must be open.
1.
Select a level surface that provide
enough open space for the intake
and/or outlet vents
.
A 10-cm spacing should be kept between
the appliance and right and back walls,
and a 30-cm spacing kept on the top.Never dismantle
the applicance's feet ,nor block the air intake and
exhaust opening.
can damage the oven.
) Place the oven as far away from
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or TV
reception.
outlet. Be sure the voltage and the
frequency is the same as the voltage
and the frequency on the rating label.
1) Blocking the intake and/or outlet openings
2
3 Plug your oven into a standard household
)
2.The applicance can be installed
with
a
degree
of
overlap
.
，
then replacing screw in its place tightly.
,Taking off installation board
) loosening screw
)taking off four screws as shown in the pictur
)putting
installation
board
to
the
following
location
，
then fixing screw just taking off tightly.
C
A
B
C
Fig 1
Fig 2
(
)
Figure2
(
)
Fig
1
ure
(A
(B
(
e.
30cm
OPEN
eft
The maximum overlap height is
layers.
two
The l
12
inch(
)
4.0 inch(10cm)
4.0 inch(10cm)
4
）
Warning: T he plug socket,electric
appliances or the appliance which are
liable effected by heat and moisture should
be kept away from
8
any vents on the oven.
Installation
Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
Countertop Installation
Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
Do not remove the light brown Mica cover
that is attached to the oven cavity to
protect the magnetron.
side must be open.
1.
Select a level surface that provide
enough open space for the intake
and/or outlet vents
.
A 10-cm spacing should be kept between
the appliance and right and back walls,
and a 30-cm spacing kept on the top.Never dismantle
the applicance's feet ,nor block the air intake and
exhaust opening.
can damage the oven.
) Place the oven as far away from
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or TV
reception.
outlet. Be sure the voltage and the
frequency is the same as the voltage
and the frequency on the rating label.
1) Blocking the intake and/or outlet openings
2
3 Plug your oven into a standard household
)
2.The applicance can be installed
with
a
degree
of
overlap
.
，
then replacing screw in its place tightly.
,Taking off installation board
) loosening screw
)taking off four screws as shown in the pictur
)putting
installation
board
to
the
following
location
，
then fixing screw just taking off tightly.
C
A
B
C
Fig 1
Fig 2
(
)
Figure2
(
)
Fig
1
ure
(A
(B
(
e.
30cm
OPEN
eft
The maximum overlap height is
layers.
two
The l
12
inch(
)
4.0 inch(10cm)
4.0 inch(10cm)
4
）
Warning: T he plug socket,electric
appliances or the appliance which are
liable effected by heat and moisture should
be kept away from
8
any vents on the oven.
