SOLUXTEC PowerSlate Mono Pure Glass Series, Руководство пользователя

Страница: 11 / 14

SOLUXTEC GmbH Page 11 of 14 version 1.4 - January 2014
Example of a bad wiring Example of a good wiring
For the wiring of the photovoltaic system suitable cables are to be used exclusively for solar
systems. Recommended are double insulated, heat-resistant UV resistant and halogen-free
single core wires. The minimum conductor surface is 4mm².
Refer to the instructions of the cable manufacturer!
Further Installation Options:
 It is not allowed to install the laminates in a roof-overhanging situation .
 To assure an ideal operation of the PV-generator you have to mind a sufficient
ventilation of the module.
 During operation of the PV-plant it could be that the given technical values of tension
and current are in real higher than calculated before under STC. In order to prevent a
possible disproportion between theoretical and real values it is recommended to add
a security margin of 1,25 on all technical values including cable cross section, inverter
power, etc.
 It has to be taken into consideration that the load of the PV-plant into the grid is
balanced on all three phases of the public power grid. All technical standards for grid-
feeding inverters have to be respected. In every case during development the
technical data-sheet of the inverter has to be taken into account.
 All inverters have to respect the national and local grid-feeding standards including
EMC regulations.