03
Important Safety Advice
When using electrical appliances, basic precautions should be followed to reduce the risk of fire,
electric shock, and injury to persons, including the following:
WARNING: If the appliance is damaged, check immediately with your retailer before installation
and operation. The heater must not be used if any part of it is damaged.
WARNING: In order to avoid overheating, do not cover the heater. The heater must not be located
immediately below, above or in front of a fixed socket outlet or electrical connection box.
WARNING: Do not use this heater in small rooms when they are occupied by persons not capable
of leaving the room on their own, unless constant supervision is provided.
WARNING: The appliance carries the Warning Symbol indicating that it must not be
covered or has a ‘Do not cover label’. Do not cover or obstruct in any way the heat
outlet grille. Overheating will result if the appliance is accidentally covered.
WARNING: Do not place material or garments on the appliance, or obstruct the air circulation
around the appliance, for instance by curtains or furniture, as this could cause overheating and a
fire risk.
CAUTION: Do not use outdoors.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the utility.
CAUTION: Some parts of this appliance around the heater grill can become very hot and cause
burns. Particular attention has to be given where children and vulnerable people are present.
CAUTION: The heater must not be positioned or used where it may come into contact with water,
for example but not exclusively, in wet rooms, bathrooms, swimming pools, laundries or used to dry
clothes.
CAUTION: Some parts of this appliance can become very hot and cause burns.
CAUTION: Only control the appliance using the manual operations or the supplied remote control
described in this manual. Do not use this heater with a programmer, timer, separate remote
control system or any other device that switches the heater on automatically.
In the event of a fault unplug the heater.
Unplug the appliance when not required for long periods.
This appliance is supplied with a power lead complete with a moulded 13 Amp UK three-pin plug
to connect into a standard UK socket outlet. This appliance must be earthed. The plug must be
easily accessible after siting the appliance. Should a new fuse be required, consult a competent
person to establish the reason for the fuse failing. Only once the fault is rectified should a new
13A fuse be inserted into the plug.
Use only a dry duster or vacuum cleaner with brush attachment to clean the appliance. Never
use abrasive cleaners, water, steam cleaners or aerosols on or near the appliance.
