15K Pack HV Installation Manual
© 2020 Soluna Australia Pty Ltd
Page 24 of 25
Published date: November 2020
5.
Care and maintenance
Keep the area around the BS clear of debris.
The Soluna 15K Pack HV BS does not require pre-scheduled preventative maintenance – it is
not designed to be opened. The unit will be replaced if a failure is diagnosed.
Firmware upgrade
To upgrade the BS firmware, the following are required.
§
Laptop (with USB port)
§
CAN box
§
System password
The following steps should be followed to upgrade the BS firmware (call 1300 126 888 for the
username and password (installer only) if required).
1)
Turn on the power – the power indicator will be lit.
2)
Plug one side of the CAN box into the CAN 2 port, the other side into the laptop.
3)
Open the file labelled ‘Soluna BMS monitor’.
4)
In the ‘Username’ field, enter '*****”.
5)
In the ‘Password’ field, enter “*****”.
6)
Click ‘Log in’.
7)
In the upper left-hand corner, click ‘CAN converter setup’.
8)
Click ‘Turn on the device’.
9)
When connected, the screen will show ‘BMS successful handshake’.
10)
Click ‘Firmware upgrade’.
11)
Open the file, choose ‘15K BMS’ then click ‘Automatically reset’ after download.
12)
Click ‘Start downloading’.
13)
The installation of the firmware is complete when ‘Download successful’ appears.
14)
If there are any issues, please contact Soluna Australia on 1300 126 888.
